Hardware specifications
- Housing: 2U 19" rack-mountable unit.
- Physical tracks: 32 Tracks @ 24-bit, 48kHz, up to 16 Tracks @ 24-bit, 96kHz (subject to hard drive performance).
- Sample Rates: 22.05/32/44.056/44.1/47.952/48/64/88.112/88.2/95.904/96kHz.
- Data Format: 24-bit linear, 16-bit linear.
- Data Storage: up to 4 x IDE hard drives (2 fixed and 2 removable), fitted in the rack unit, PIO Mode 4 compatible.
- Recording time: variable according to the size of installed hard drive(s) and chosen resolution and Sample Rate. e.g. 10GB gives 31hrs 29min total @ 16-bit, 44.1kHz or 9hrs 38min @ 24-bit, 96kHz.
- Analog Inputs: 2 x XLR inputs, balanced. Input level +14dBU to +24dBU full scale (+4dBU nominal with 20dB headroom), internally adjustable.
- Analog Outputs: 4 x XLR outputs, balanced +4dBU nominal with 20dB headroom. Output level +14dBU to +24dBU full scale (+4dBU nominal with 20dB headroom), internally adjustable.
- A/D Conversion: 24-bit, 96kHz AKM converters with enhanced dual-bit delta-sigma, 128x oversampling.
- D/A Conversion: 24-bit, 96kHz Analog Devices converters with multi-bit sigma-delta modulator with dither.
- Input S/N Ratio: better than 110dB un-weighted, 113dB A weighted.
- Input THD+N: better than 0.002% @ 1kHz FS
- Input Crosstalk: better than -100dB
- Output S/N Ratio: better than 125dB (data zeroed), better than 100dB un-weighted active.
- Dynamic Range: 113dB A weighted at 48kHz.
- Output THD+N: less than -92dB @ 1kHz -12dB FS.
- Output Crosstalk: better than -100dB.
- Freq. Response: 20Hz to 20kHz, -0.4dB
- Wow & Flutter: Unmeasurable
- Digital Input: 1 x XLR, AES/EBU format (2 input channels). Internal jumpers for S/PDIF levels.
- Digital Outputs: 2 x XLR, AES/EBU format (4 output channels). Internal jumpers for S/PDIF levels.
- TDIF Interface Ports: 3 x TDIF Ports (24 channels digital in.
25 pin “sub D” type connector (24-bit, 8 inputs and 8 outputs). - Synchronization: Master - MIDI Time Code (MTC), MIDI Clock and MIDI Song Position Pointer.
- Synchronization: Slave - MIDI Time Code (MTC) with “continuous” or “trigger” chase lock modes.
- Clock Sync: SuperClock & WordClock In/Out.
- Soundscape Sync Option: VITC & LTC Master/Slave, RS422 Master/Slave (Sony 9-Pin protocol), Video Sync (Blackburst).
- MIDI Interface: In - Thru - Out.
- Backup Media: via the PC e.g. to a CDR, DVD-Ram, SCSI tape/optical drive or any logical PC or network drive.
- Host Interface: PCI card, Plug and play compatible.
- Parallel Port Interface Cable: Optional cable allowing full operation from the printer port of notebook or desktop PCs - EPP mode required.
- Power Requirements:110V/220V Switchable (90V to 250V working range).
90W Total - 65W for switch mode power supply, 25W for Analog Option. - Fuse Rating (as indicated on back panel):
+ Hardware revision A units: 1.25A, time-lag, slow blow, 250VAC
+ Hardware revision B units: 110V:375mA, time-lag, slow blow, delay (UL198G)/220V:160mA, time-lag (IEC127-2 / III)
Read more:
Software specifications
|
 |
|